聯系我們
江蘇金鷹潤滑材料(金湖)有限公司
電話:0517-86986936
傳真:0517-86986939
郵箱:4103850007@qq.com
地址:江蘇金湖工二路19號優尚JY6063合成油氣潤滑油
作者:金鷹潤滑材料(金湖)有限公司點擊量:402發布時間:2019-04-12 04:46
優尚JY6063合成油氣潤滑油適用于鋼廠油氣潤滑系統,各種中,低速,中負荷閉式工業齒輪,渦輪蝸桿,滑動,滾動軸承的潤滑。優尚JY6063合成油氣潤滑油使用溫度范圍:1--~460號油為-30℃~+200℃, 680號油為-25℃~+200℃,短期可耐220℃
This product is suitable for lubrication of steel mills lubrication system, all kinds of low-speed, medium-load closed industrial gears, turbine worm, sliding, rolling bearing lubrication.Operating temperature range: 1-- ~ 460 oil is -30 ℃ ~ +200 ℃, 680 oil is -25 ℃ ~ +200 ℃, short-term resistance to 220 ℃
優尚JY6063合成油氣潤滑油產品描述PRODUCT DISCRIPTION
優尚JY6063合成油氣潤滑油是以合成油為基礎油,并加有極壓,抗磨等多種添加劑精制而成的油氣潤滑劑。This product is based on synthetic oil, and add extreme pressure, anti-wear and other additives refined oil and gas lubricants.
優尚JY6063合成油氣潤滑油產品特點PRODUCT FEATURES
優異的粘溫性能 Excellent viscosity-temperature performance
優異的低溫流動性能,保證設備在較低溫度下也能正常運行Excellent low-temperature flow properties, to ensure that equipment at lower temperatures can be normal operation
優異的耐熱穩定性能,防止油品在高溫下變質
Excellent heat stability, to prevent oil deterioration at high temperatures
良好的極壓抗磨性能,減少設備磨損Good extreme pressure anti-wear performance, reduce equipment wear and tear
在高溫下長期使用不結焦,無沉淀物Long-term use at high temperatures without coking, no sediment
優尚JY6063合成油氣潤滑油主要理化指標 PHYSICOCHENICAL
優尚JY6063合成油氣潤滑油包裝形式PACKING FORM
16kg/200L鐵桶 16kg/200L iron barrel
優尚JY6063合成油氣潤滑油注意事項ANNOUNCEMENTS
首次使用時,應將潤滑系統清洗干凈。勿與其他油品混用,不同潤滑油之間可能會發生物理或者化學反應導致性能大大下降。
When used for the first time, the lubrication system should be cleaned. Do not mix with other oils, different lubricants may occur between the physical or chemical reaction led to a significant decline in performance.
使用后及時封蓋以避免水分,灰塵等雜質混入
Cover after use to avoid moisture, dust and other impurities mixed
使用溫度在100℃以內時,可用丁晴膠制密封件,持續溫度較高時,建議采用氟橡膠或硅橡膠密封件
Use temperature is less than 100 ℃, the available Dingqing plastic seals, continuous high temperature, it is recommended to use fluorine rubber or silicone rubber seals
本產品對工業漆不適,建議采用環氧樹脂或改性酚醛樹脂涂料,油位計宜采用玻璃或聚酰胺材料制品。
This product is not suitable for industrial paint, it is recommended to use epoxy resin or modified phenolic resin coating, oil level gauge should adopt glass or polyamide material products.
This product is suitable for lubrication of steel mills lubrication system, all kinds of low-speed, medium-load closed industrial gears, turbine worm, sliding, rolling bearing lubrication.Operating temperature range: 1-- ~ 460 oil is -30 ℃ ~ +200 ℃, 680 oil is -25 ℃ ~ +200 ℃, short-term resistance to 220 ℃
優尚JY6063合成油氣潤滑油產品描述PRODUCT DISCRIPTION
優尚JY6063合成油氣潤滑油是以合成油為基礎油,并加有極壓,抗磨等多種添加劑精制而成的油氣潤滑劑。This product is based on synthetic oil, and add extreme pressure, anti-wear and other additives refined oil and gas lubricants.
優尚JY6063合成油氣潤滑油產品特點PRODUCT FEATURES
優異的粘溫性能 Excellent viscosity-temperature performance
優異的低溫流動性能,保證設備在較低溫度下也能正常運行Excellent low-temperature flow properties, to ensure that equipment at lower temperatures can be normal operation
優異的耐熱穩定性能,防止油品在高溫下變質
Excellent heat stability, to prevent oil deterioration at high temperatures
良好的極壓抗磨性能,減少設備磨損Good extreme pressure anti-wear performance, reduce equipment wear and tear
在高溫下長期使用不結焦,無沉淀物Long-term use at high temperatures without coking, no sediment
優尚JY6063合成油氣潤滑油主要理化指標 PHYSICOCHENICAL
分析項目 | 100 | 150 | 220 | 320 | 460 | 680 |
運動粘度100℃ 40℃ |
17.29 100.7 |
24.96 158 |
33.8 226.7 |
48.34 325 |
68.05 462.3 |
103.9 665.8 |
粘度指數 | 284 | 194 | 207 | 210 | 224 | 236 |
閃點(開口),℃ | 254 | 266 | 271 | 271 | 275 | 275 |
傾點℃ | -42 | -40 | -36 | -36 | -33 | -30 |
銅腐蝕100℃,3Hr | 1b | 1b | 1b | 1b | 1b | 1b |
16kg/200L鐵桶 16kg/200L iron barrel
優尚JY6063合成油氣潤滑油注意事項ANNOUNCEMENTS
首次使用時,應將潤滑系統清洗干凈。勿與其他油品混用,不同潤滑油之間可能會發生物理或者化學反應導致性能大大下降。
When used for the first time, the lubrication system should be cleaned. Do not mix with other oils, different lubricants may occur between the physical or chemical reaction led to a significant decline in performance.
使用后及時封蓋以避免水分,灰塵等雜質混入
Cover after use to avoid moisture, dust and other impurities mixed
使用溫度在100℃以內時,可用丁晴膠制密封件,持續溫度較高時,建議采用氟橡膠或硅橡膠密封件
Use temperature is less than 100 ℃, the available Dingqing plastic seals, continuous high temperature, it is recommended to use fluorine rubber or silicone rubber seals
本產品對工業漆不適,建議采用環氧樹脂或改性酚醛樹脂涂料,油位計宜采用玻璃或聚酰胺材料制品。
This product is not suitable for industrial paint, it is recommended to use epoxy resin or modified phenolic resin coating, oil level gauge should adopt glass or polyamide material products.
文章標題:優尚JY6063合成油氣潤滑油
文章地址:http://www.kathywellerdesigns.com/gyrhy/20190412_66.html
金鷹化工供應商為您提供優尚JY6063合成油氣潤滑油信息,可查看優尚JY6063合成油氣潤滑油特點、參數、應用等。優尚JY6063合成油氣潤滑油廠家提供全網優質貨源,可在線咨詢優尚JY6063合成油氣潤滑油加工批發價格具體多少錢,金鷹化工--您可信賴的優尚JY6063合成油氣潤滑油廠家。
上一篇:優尚JY6962油氣潤滑專用油
下一篇:沒有了